Take a look at the upper edge pieces on the F, R, B, and L faces. Repeat for each white edge square, until they are all on the upper face.Įxtend the cross down to the corners.Rotate F2 (forward 180º) to bring the white square into that UF position. Turn the entire cube so that "empty space" is located at UF (Upper face, next to Front face). If there's a white edge square on the Down face, rotate the Down face until the white square is directly opposite an empty (non-white) edge space in the Upper face.Rotate until the white square is in the Down face. If there's a white edge square in the middle row of the R or L face, rotate either the F or B side, whichever is next to the white square.If there's a white edge square in the bottom row of the R or L face, rotate that face once to bring the white square to the top row.There are so many possible starting configurations that it is not possible to give a step-by-step method for this process, but this process should help you get there: X Research source Move white edges to the upper face to form a cross.
Be careful not to get confused, as this looks like counterclockwise from the Front perspective. B instructs you to rotate the back face clockwise, from the back wall's perspective.U' tells you to rotate the Upper face counterclockwise, from the ceiling's perspective.This means rotating the Left face toward you. L tells you to rotate the Left face clockwise.(To see why this is true, start turning the Front face clockwise, then move the cube so this becomes the Right face.) This means rotating the Right face away from you. R tells you to rotate the Right face clockwise.F' tells you to rotate the Front face counterclockwise.Here are a few examples: X Research source
#Como armar un cubo de colores plus#
One letter plus an apostrophe (such as L') means to rotate that face counterclockwise 90º.
With this in mind, a one-letter instruction (such as L) means to rotate that face clockwise 90º (one quarter turn). The terms "clockwise" and "counterclockwise" always assume you are looking directly at the face you are working on. Understand clockwise and counterclockwise rotation.
0 kommentar(er)
